Description
PFF3-813 fits vehicles with 197mm long anti-roll bar links with a 12mm bolt. Not for models with Code 0AW Porsche Dynamic Chassis Control PDCC (Hydraulic Anti-roll Bars).
OEM Part Number: 7L0411317
OEM Part Number: 95534306900
Size
12mm
Fitting Instructions:
1. Remove the arm and the original bush from the car.
2. Clean any dirt and corrosion from the bore of the arm and file any sharp edges.
3. Lubricate the outside of the new polyurethane bush with washing up liquid and push it into the arm. Tip: hold the bush at an angle to the armtoget the bush started in the hole.
4. Apply some of the supplied grease to the knurled bore of the bush and insert the stainless steel sleeve into the bore of the polyurethane part so it sits flush.
5.While fitting the arm back to the vehicle, fit a washer to each of the faces of the bushes (Figure 2). Tension all hardware to manufacturers recommended torque settings.
Contents (parts per pack):
- 4 x Polyurethane Bushes
- 4 x Stainless Steel Sleeves
- 8 x Mild Steel Washers
- 1 x PTFE/Silicone Grease
Reviews
There are no reviews yet.